Our most popular question we get in the winter is: “Why is my furnace blowing cold air?”
More often than not, we have say “It’s hard to tell from here”. Here a few do-it-yourself items to check before you schedule a repair call.
If you feel your furnace is blowing hot air at times and cold air other times, check to see if your fan is set to ON - when it should be set to AUTO.
When your thermostat is set to ON, it means the furnace blower (the fan that blows warm air into your home) is running continuously...even when the burners are not running.
This means that your furnace is blowing air into your home constantly, even when that air hasn’t been heated.
The solution: Check your thermostat settings and ensure that the fan setting is turned to AUTO. Now the blower should only run when the burners are on.
Older furnaces use a permanently lit pilot light to ignite the gas for the burner. If the pilot light goes out, your furnace can’t heat any air.
The solution: Relight the pilot light. Instructions on your furnace should show you how to do this. If the pilot light keeps going out, you have another issue that a professional needs to solve.
Side note: Old furnaces waste tons of gas to keep the pilot flame lit. Consider upgrading to a newer, more efficient furnace that does not use a pilot light.
Your furnace actually heats air via a part of the furnace called the heat exchanger. A heat exchanger is a group of metal coils that are heated. When air blows over the coils, the air picks up that heat.
Sometimes, the heat exchanger can get too hot and overheat. Your system can sense this overheating and will turn off the burners but keep the blower (fan) on to help heat exchanger cool down.
If this is your issue, you’ll notice cool air blowing from your vents instead of heated air. You may also notice a sort of burning smell as well as a humming noise.
The solution: There are a variety of reasons that a heat exchanger can overheat, but typically anything that limits airflow over the heat exchanger can cause overheating. Our suggestion would be to check your air filter. If your air filter is clogged, it won’t pull in as much air as necessary to keep the heat exchanger from overheating.
If you replace your air filter and are still noticing cool air coming from your vents a few hours later, it’s time to call a professional. An overheated heat exchanger is not something you want to happen regularly, and a pro should be able to come take a look at your system and determine what the issue is.
If there is no gas supply to your furnace, there will be no heat. Your furnace needs a consistent supply of gas to the burners to heat the air. But if the gas supply is off or weak, your pilot light won’t be able to light or stay lit, meaning you’ll have no heated air in your home.
The solution: First of all, ensure that the gas valve is turned on (make sure the valve lever is parallel/in line with the gas supply pipe). If your gas is on and you’re still feeling cold air coming from your vents, it’s time to call a pro. DO NOT try to work with the gas supply in your home. Call a professional.
If you are having trouble with your furnace and need a furnace repair, we are the trusted furnace repair professionals in Waynesboro, VA. Book your furnace repair here
Affordable Financing Options on Qualifying Systems
After-Hour Service Calls for Emergencies
Dedication to Excellence on Services & Installation
NATE Certified Service & Installation Company
Trane Comfort Specialists & Independent TCS Dealers
Offer the Most Modern Systems and Technologies
For 10+ years, All-Temp Heating & Cooling, LLC has stood by our promise to offer top-quality services and products. In a field where customer service reigns, we are known for our commitment to excellence, every time.